Liebherr motor

Kawasaki HPC Series Staffa Radial Piston Motor

HBOETH BOLE HPC200 Kawasaki Series Staffa Radial Piston Motor

Series:HPC

High Power Variable Displacement

Model Sizes:HPC080,HPC125,HPC200,HPC270,HPC325.

Nominal Pressure 250 bar

Maximum Pressure 275 bar

The enhanced variable displacement HPC models include special low friction components, combined with crankcase flushing flow, to achieve increased shaft power. It is used around the world in marine and offshore winch applications and is known for its efficiency and reliability.

Kawasaki HPC Staffa Radial Piston Motors are available in the dual displacement models, featuring two pre-set displacements that can be selected from a broad range to meet the demands of a

particular application. Directly on the motor or remotely installed, a directional control valve selects the displacements hydraulically. While the motor is operating, it is simple to adjust the motor's

displacement.

In order to produce improved shaft power, the enhanced variable displacementHPC models combine specific low friction components with crankcase flushing flow. It is renowned for its reliability

and efficiency and is utilized in maritime and offshore winch applications all over the world.

Characteristics

Dynamic displacement change under load

Freewheel configurations are available

Constanthorsepower control option are available

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF250 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF165 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF125 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF100 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF090 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF064 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF058 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF045 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF032 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr FMF Series Axial Piston Hydraulic Motor

HBOETH BOLE FMF025 LIEBHERR Series Axial Piston Hydraulic Motor

Constant Displacement Motor, Open/Closed Circuit

Plug-In Motor

Series FMF Liebherr Hydraulic Motor

Model Sizes:FMF 025 /FMF 032/ FMF 045 /FMF 058/FMF 064/FMF 090/FMF 100/FMF125 /FMF 165/FMF 250

Nominal Pressure 350/420 Bar

Maximum Pressure 380/450 Bar 6,526.70 psi

Liebherr FMF Axial Piston Hydraulic Motor is designed by Liebherr, they comes as swashplates for open and closed circuits. Liebherr also builds constant-displacement plug-in motors developed in

numerous nominal sizes that ranges from 1.53to 15.26 inch3 (25 to 250 cm).

The nominal pressure Liebherr FMF motors is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure of these motors is 5,511 or 6,527 psi (380 or 450 bar), based on on the nominal size.

Liebherr DMFA Series Axial Piston Hydraulic Motor

HBOETH BOLE DMFA355 LIEBHERR Series Axial Piston Hydraulic Motor

LiebherrDMFAAxial Piston

Hydraulic Motor series including all sizes and displacements.

Constant Displacement Motor, Open/Closed Circuit

Flange Mounted Motor

Series DMFA

Model Sizes:DMFA355

Nominal Pressure 400 Bar (5,802 PSI)

Maximum Pressure 450 Bar (6,527 PSI)

Liebherr DMFA Axial Piston Hydraulic Motors are specially designed for use in mobile machinery in harsh environments. Liebherr builds axial piston motors in the DMFA series as swashplates for

open and closed circuits enabling an optional through drive.

Liebherr DMFA motors features inverse drive with a swivel angle of 22°that is very efficient and has a very high power density, which is ideal for applications that require a constant displacement to hydraulic motor.

The flange-mounted constant motors are available in LiebherrDMFA series with nominal size of 355. The nominal pressure of the units is 5,802 psi (400 bar) and the maximum pressure is 6,527 psi(450 bar) absolute.

Liebherr CMVE Series Axial Piston Hydraulic Motor

HBOETH BOLE CMVE165 LIEBHERR Series Axial Piston Hydraulic Motor

Axial Piston Hydraulic Motor

series within their entire sizes.

Variable Displacement Plug-In Motor, Open/Closed Circuit

Series CMVE LIEBHERR HYDRAULIC MOTOR

Model Sizes:CMVE85/CMVE108/CMVE135/CMVE165

Nominal Pressure 380 Bar (5,511 ps)

Maximum Pressure 400 Bar (5,802 psi)

Liebherr CMVE Axial Piston Hydraulic Motor are designed by Liebherr as a swashplates for open circuits. Liebherr variable displacement plug-in motors comes in nominal sizes that ranges from

5.19 to 10.07 inch3 (85 to 165 cm3). The nominal pressure of the units is 5,511 psi (380 bar) and the maximum pressure is 5,802 psi (400 bar) absolute.

The Liebherr CMVE series of axial piston hydraulic motors are designed for multiple applications but specially used in various crawler vehicles. This motors are also called travel motor with

hydraulic two point control, which is a very compact drive unit due to the integrated design of the holding brake and brake valve

Liebherr CMVE Series Axial Piston Hydraulic Motor

HBOETH BOLE CMVE135 LIEBHERR Series Axial Piston Hydraulic Motor

Axial Piston Hydraulic Motor

series within their entire sizes.

Variable Displacement Plug-In Motor, Open/Closed Circuit

Series CMVE LIEBHERR HYDRAULIC MOTOR

Model Sizes:CMVE85/CMVE108/CMVE135/CMVE165

Nominal Pressure 380 Bar (5,511 ps)

Maximum Pressure 400 Bar (5,802 psi)

Liebherr CMVE Axial Piston Hydraulic Motor are designed by Liebherr as a swashplates for open circuits. Liebherr variable displacement plug-in motors comes in nominal sizes that ranges from

5.19 to 10.07 inch3 (85 to 165 cm3). The nominal pressure of the units is 5,511 psi (380 bar) and the maximum pressure is 5,802 psi (400 bar) absolute.

The Liebherr CMVE series of axial piston hydraulic motors are designed for multiple applications but specially used in various crawler vehicles. This motors are also called travel motor with

hydraulic two point control, which is a very compact drive unit due to the integrated design of the holding brake and brake valve

Liebherr CMVE Series Axial Piston Hydraulic Motor

HBOETH BOLE CMVE105 LIEBHERR Series Axial Piston Hydraulic Motor

Axial Piston Hydraulic Motor

series within their entire sizes.

Variable Displacement Plug-In Motor, Open/Closed Circuit

Series CMVE LIEBHERR HYDRAULIC MOTOR

Model Sizes:CMVE85/CMVE108/CMVE135/CMVE165

Nominal Pressure 380 Bar (5,511 ps)

Maximum Pressure 400 Bar (5,802 psi)

Liebherr CMVE Axial Piston Hydraulic Motor are designed by Liebherr as a swashplates for open circuits. Liebherr variable displacement plug-in motors comes in nominal sizes that ranges from

5.19 to 10.07 inch3 (85 to 165 cm3). The nominal pressure of the units is 5,511 psi (380 bar) and the maximum pressure is 5,802 psi (400 bar) absolute.

The Liebherr CMVE series of axial piston hydraulic motors are designed for multiple applications but specially used in various crawler vehicles. This motors are also called travel motor with

hydraulic two point control, which is a very compact drive unit due to the integrated design of the holding brake and brake valve

Liebherr CMVE Series Axial Piston Hydraulic Motor

HBOETH BOLE CMVE85 LIEBHERR Series Axial Piston Hydraulic Motor

Axial Piston Hydraulic Motor

series within their entire sizes.

Variable Displacement Plug-In Motor, Open/Closed Circuit

Series CMVE LIEBHERR HYDRAULIC MOTOR

Model Sizes:CMVE85/CMVE108/CMVE135/CMVE165

Nominal Pressure 380 Bar (5,511 ps)

Maximum Pressure 400 Bar (5,802 psi)

Liebherr CMVE Axial Piston Hydraulic Motor are designed by Liebherr as a swashplates for open circuits. Liebherr variable displacement plug-in motors comes in nominal sizes that ranges from

5.19 to 10.07 inch3 (85 to 165 cm3). The nominal pressure of the units is 5,511 psi (380 bar) and the maximum pressure is 5,802 psi (400 bar) absolute.

The Liebherr CMVE series of axial piston hydraulic motors are designed for multiple applications but specially used in various crawler vehicles. This motors are also called travel motor with

hydraulic two point control, which is a very compact drive unit due to the integrated design of the holding brake and brake valve