Hydraulic Motor

F11 Small Frame Fixed Displacement Bent-Axis Pumps/Motors can be used at unusually high shaft speeds,Intermittent operating pressures to 6000 PSI (413.7 BAR).

F12 Large Frame Fixed Displacement Bent-Axis Pumps is a high performance, bent axis, fixed displacement heavy-duty pump series. They can be used in numerous applications where high efficiency, high drive speeds, high pressure and indirect drives are desired. The F12 will provide high output flows in a very compact package.Intermittent operating pressures to 7000 PSI (482.6 BAR).

These are superior motors that can be used in a multitude of applications in the commercial, industrial, building service, water treatment and agricultural fields where superior quality and reliability are demanded.
The M Range of Motors Are Made According to Iec Standards, And Incorporate the Following Series:

Design characteristics:
● high pressure axial piston motor in swash plate design for closed and open loop systems
● optimised start-up and low-speed characteristics
● optionally with purge valves for circuit and case flushing
● HP valves possible
● through-shaft with bare shaft end or coupling flange
● SAE High pressure ports, radial or axial
● SAE mounting flange with ANSI or SAE spline shaft
● plug-in version optional
● speed sensor optional
Series:HPV-O2
Variable Displacement Pumps For Closed Circuit
Model Sizes:HPV55,HPV75,HPV105,HPV135,HPV165,HPV210,HPV280.
Nominal Pressure 450 bar
Maximum Pressure 500 bar

Series: Series 90 Axial Piston Motors
● Series 90 – advanced technology today
● Seven sizes of variable displacement pumps
● Five sizes of fixed displacement motors
● One variable displacement motor
● SAE and cartridge mount configurations
● Efficient axial piston design
● Proven reliability and performance
● Compact, lightweight
● Worldwide sales and service

Danfoss 90M 
90M042 –Series 90 hydrostatic pumps and motors can be applied together or combined withother products in a system to transfer and control hydraulic power. They are intended for closed circuit applications.
The working volume of the motor is 42 cm3.The operating frequency of rotation of the shaft is 4200 rpm.
90 Series Danfoss motors are used in HST (hydrostatic transmission) on such machines as bulldozer, excavator, pipelayer, skid steer loader, snowcat, as well as on the traction winch drive and drilling rigs.
Danfoss Motor 90 Series Is
five sizes of fixed displacement motors
efficient axial piston design
proven reliability and performance
compact, light weight

Bosch Rexroth A6VM Series 6x (series 63 and series 65) motors are all-purpose high pressure motors for use in open and closed circuits.
The A6VM Series 63 motor is available in:
28 cc/rev displacement with nominal pressure, 400 bar and maximum pressure, 450 bar;
250 | 355 | 500 | 1000 cc/rev with nominal pressure, 350 bar and maximum pressure, 400 bar.
The A6VM Series 65 motor is available in displacements of: 55 |80 | 107 | 140 | 160 | 200 cc/rev with nominal pressure, 400 bar and maximum pressure 450 bar.
Other features of Bosch Rexroth A6VM Series 6x motors include:
Robust motor with long service life;
Approved for very high speeds;
Wide control range (can be swiveled to zero);
High torque;
Large variety of controls;
Optional attached flushing and boost-pressure valve;
Optional integrated or attached counterbalance valve;
Bent-axis design.

Bosch Rexroth A6VE Series 6x (series 63 and 65) motors are high pressure, axial piston motors for integration in mechanical gearboxes. They are approved for very high speeds, provide high torque and have a bent axis design.
The A6VE Series 63 motor is available in:
28 | 55 | 80 | 107 | 160 cc/rev  with nominal pressure of 400 bar and maximum pressure of 450 bar
250 cc/rev with nominal pressure of 350 bar and maximum pressure of 400 bar
The A6VE Series 65 motor is available in the following displacement sizes:  55 | 80 | 107 | 160 | 200 cc/rev.  Nominal pressure is up to 400 bar and maximum pressure is 450 bar.
Other features of teh Bosch Rexroth A6VE series 6x motors include:
For use in open and closed circuits;
Space-saving construction due to recessed mounting flange;
Easy to install, simply slide into the mechanical gearbox;
Wide control range (can be swiveled to zero);
Optional attached flushing and boost-pressure valve;
Optional integrated or attached counterbalance valve.

Rexroth Axial Piston Fixed Motor A2FM Description
Axial piston fixed motor, A2FM series 6x
● All-purpose high pressure motor;
● Size 5 … 1000, such as A2FM 5, A2FM 10, A2FM 12, A2FM 16, A2FM 23, A2FM 28, A2FM 32, A2FM 45, A2FM 56, A2FM 63, A2FM 80, A2FM 90, A2FM 107, A2FM 125, A2FM 160, A2FM 180, A2FM 200, A2FM 250, A2FM 355, A2FM 500, A2FLM 250, A2FLM 355, A2FLM 500, A2FLM 710, A2FLM 1000;
● Nominal pressure up to 400 bar;
● Maximum pressure up 450 bar;
● The axial piston unit is designed to be used in open and closed circuits.

The A2FE motors is available in displacement sizes: 28 | 32 | 45 | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 | 250 | 355 cc/rev. Nominal pressure is up to 400 bar, maximum pressure is up to 450 bar. The output torque increases with the pressure differential between the high-pressure and the low-pressure side.
Other features of the Bosch Rexroth A2FE motor include:
Space-saving construction due to recessed mounting flange
Easy to install, simply slide into the mechanical gearbox
High power density
Very high total efficiency
High starting and total efficiency
Optional with integrated pressure relief valve
No configuration specifications to be observed when installing
Optional with mounted addifitonal valve: counterbalance valve (BVD/BVE), flushing and boost-pressure valve
Bent-axis design

Features of A2FE Axial Piston Hydraulic Pump
Space-saving construction due to recessed mounting flange
Easy to install, simply slide into the mechanical gearbox
High power density
Very high total efficiency
High starting and total efficiency
Optional with integrated pressure relief valve
No configuration specifications to be observed when installing
Optional with mounted addifitonal valve: counterbalance valve (BVD/BVE), flushing and boost-pressure valve
Bent-axis design