Danfoss BMER HYDRAULIC Orbital MOTOR BMER200 high-quality HBOETH motor

1. Precision-Engineered Stator Architecture

   • Parametric-optimized rotor-stator geometry achieves starting pressure as low as 1.5 MPa

   • Energy conversion efficiency exceeding 93% with <0.5% torque degradation over 10,000 cycles

   • Dual-stage wear compensation maintains >98% volumetric efficiency throughout service life

2. Heavy-Duty Performance Capabilities

   • Continuous pressure rating: 280 bar | Peak torque output: 850 Nm

   • Needle roller bearing assembly withstands radial loads up to 15 kN

   • Direct-drive compatibility for AGV/Powerpack/Hydraulic Winch integrations

3. High-Speed Porting Innovation

   • 6:1 velocity ratio between valve plate and output shaft enhances flow distribution accuracy to ±0.25%

   • Self-lapping wear surfaces enable automatic clearance compensation (0-150μm)

   • Staggered timing ports ensure speed stability (±1.5% deviation) under variable loads

4. Leakage-Optimized Distribution System

   • Three-dimensional pressure balancing reduces internal leakage to <0.08 L/min at 1500 RPM

   • Hard-coated valve interfaces (HVOF WC-Co) achieve surface roughness Ra 0.1μm

   • Low-speed smoothness maintains <5% torque ripple at 5 RPM

Certified Performance

• ISO 4401:2021 porting standards compliance

• 50,000-cycle endurance validation per ISO 19973-3

• IP69K protection rating for harsh environments

Customization Options

• Field-reversible rotation (CCW/CW)

• Integrated speed sensors (Hall-effect/inductive)

• Multi-circuit manifolds for parallel power trains